Red Jacket Fueling Systems

Red Jacket’s unsurpassed expertise helps sites optimize fuel flow. Part of the industry’s leading Veeder-Root suite of products, Red Jacket’s family of Submersible Turbine Pumps and Pump Controllers ensures that sites can pump fuel quickly, efficiently and safely – whether it’s motor fuel, diesel, aviation gasoline, LPG, ethanol/methanol or kerosene – in above ground or underground storage tanks. As a Veeder-Root flagship product line, Red Jacket is backed by the largest network of distributors and authorized service contractors worldwide.



The Red Jacket Submersible Turbine Pump

Red Jacket Submersible Turbine Pumps (STPs) are the most widely installed submersible fuel pump in the world. That’s because Red Jacket continues to offer the industry’s most advanced STPs - delivering the highest efficiency, fuel flow and lowest power consumption to your fuel pumps.

Our STPs are designed for serviceability, safety, and ease of upgrades.


The Red Jacket 4" Submersible Turbine Pump

Red Jacket delivers faster, more reliable fuel flow for the lowest cost of ownership. The Red Jacket is a fixed speed submersible turbine pump that optimizes fuel flow to your dispensers. Its motor performance delivers higher flow rates than any other motor in the industry. It features Red Jacket’s advanced packer manifold design, making it the industry’s easiest and safest STP to install and service. Available in ¾HP to 2HP configurations and fixed or variable Quick Set lengths.

Key features:

  • Superior motor design delivers higher flow rates, lower power consumption, and increased safety and reliability.
  • Advanced packer manifold delivers automatic fuel drain, electrical disconnect, and reduced lifting force for increased site and environmental safety.
  • Built-in isolated contractor’s box for quicker and safer installation.
  • Automatic electrical disconnect offers increased safety.
  • Check valve and manifold design for easier line tests & servicing.
  • AG Model available for biofuel applications.
More Info
The Red Jacket Submersible Turbine Pump AG for Alternate Fuels

All the advantages of the Red Jacket Submersible Turbine Pump, designed for alternative fuels – such as alcohol and ethanol. Red Jacket Submersible Turbine Pump AG is a fixed-speed alcohol gas fuel pump with a motor that delivers a higher flow rate than any other submersible pump, to optimize flow to your dispensers. The built-in contractor box, time-saving yolk assembly and spill-free extractable make it the world’s easiest, safest alcohol gas (AG) submersible pump to install and service.

Key Features:

  • For alternative fuels: Ethanol or Methanol concentrations up to 100%
  • UL79A and UL79B certified for use with renewable biofuels
  • New and improved motor performance delivers higher flow rates
  • Built-in contractor’s box – no adjustments required
  • Increased electrical safety
  •  

More Info
The Red Jacket Red Armor Submersible Turbine Pump

The ultimate survivor in your fueling infrastructure. The Red Jacket Red Armor series submersible turbine pumps are built to last in the harshest corrosive environments created by ULSD and ethanol blends

Key Features:

  • Specialty coating on all cast surfaces withstands acetic acid exposure to prevent pitting and deterioration over time
  • Stainless Steel construction on all exposed surfaces ensures easy maintenance for the life of the pump
  •  

Protect against corrosion in-sump and in-tank
In-sump protection includes powder coated packer manifold, stainless steel riser, nuts, springs, screws, check valve seat, eye bolt, and check valve guide

In-tank protection includes powder-coated discharge head, stainless column pipe and quick-set connector.

The Red Armor specialty coating was selected as the toughest performer across a battery of abrasion, immersion and impact standards.

More Info
Maxxum Submersible Turbine Pump


Red Jacket delivers the highest flow rate of any 6”high capacity pump in the industry

The Red Jacket Maxxum Submersible Turbine Pump is a 6” high flow submersible fuel pump that provides the highest flow rates for its size. With a 3 or 5 HP motor, it’s specifically engineered for high throughput applications such as truck stops, where high demand, multiple fuel points, and long piping runs reduce fuel flow to the nozzle. It boasts the industry’s leading serviceability and safety features.



Key features:

  • Delivers over 20% more flow than alternative high capacity pumps.
  • Compatible with Veeder-Root Pressurized Line Lead Detector (PLLD), vapor recovery pump driving port and transducer post for electronic leak detection (ELLD).
  • Easy and safe electrical yoke disconnect, termination of pump wiring in conduit box.
  • Quick removal of extractable pump head and quick accessibility of check valve
More Info
Red Jacket Pump IQ Control Box

Red Jacket’s IQ Control Box provides operators protection against downtime and is a more reliable alternative to ensure maximum fuel flow during peak fueling times than variable speed technology.

Red Jacket's IQ Control Box is a submersible turbine pump interface that improves the longevity of the submersible pump motor. It’s engineered to provide protection from dry-run conditions, locked rotor, and site voltage fluctuations. It cuts downtime and boosts bottom-line profits by warning site personnel of conditions impacting the ability to fuel. Additionally, it stages multiple pumps based on site fuel demand to meet fuel flow requirements, provide seamless backup, and extend motor life.

Key features:

  • Allows for demand-based staging of multiple pumps to control fuel flow based on changing fuel demand
  • Automatically resets after dry run condition when fuel is added to the tank to minimize downtime
  • Protects wiring and controls from locked rotor or high current
  • Warns site personnel of conditions impacting the ability to fuel
  • Monitors site power conditions to ensure long motor life and uninterrupted fueling
More Info
Red Jacket Standard Control Box


Red Jacket’s Standard Control Box is our simplest way to control site fueling.

Maintain safe, reliable, efficient fuel flow the Red Jacket’s most basic submersible turbine pump interface. Our Standard Control Box interfaces between the fuel dispenser and the turbine pump and has an indicator light that signals when a customer begins fueling. It’s also designed as a “lock-out-tag-out” device to ensure safety during maintenance.

Key features:

  • Easy interface between dispenser and turbine pump
  • Proved “lock-out-tag-out“ for safe pump servicing it
  • Easily accessible capacitor for troubleshooting and repair, saving costs and time
  • No need for explosion-proof junction box and electrical fittings kit for 50Hz, three-phase pump, creating lower installation costs
  • Available with capacitor and without capacitor
More Info
Red Jacket ISOTROL 1-8 Control Box

Red Jacket’s Isotrol 1-8 Control Box isolates dispenser handle signals to protect equipment and technicians.

The Red Jacket Isotrol 1-8 Control Box is the most versatile dispenser handle signal isolation system available. The Isotrol 1-8 Control Box isolates handle signals between each dispenser and protects against wiring shorts and phasing issues. Plus it keeps technicians working on site safe from dangerous feedback. The Isotrol 1-8 Control Box is available with a built-in relay or without.

Key features:

  • Dedicated Automatic Tank Gauge (ATG) line leak output and coil for easy compatibility with PLLD
  • Terminals are labeled for easy wiring and compatibility
  • May be used with Red Jacket’s Submersible Turbine Pump, Maxxum, or legacy Big Flo Pump, IQ Control Box, or as a “stand-alone”
  • Easily retrofitted to existing locations
  • Compliant with NEC requirements for handle isolation
More Info
See below how Gasboy STP Products are made